Electricians in Scranton, PA
Licensed electricians serving Scranton, Pennsylvania. Panel upgrades, EV chargers, rewires, and service calls. License data and local permit requirements.
Last updated: April 2026 · Cost data from RSMeans & BLS regional indices · Permit data from official city .gov sources
Top Rated Electricians in Scranton
Bee-Lectric NEPA
Master ElectricianEV CertifiedThroop-based electrical contractor led by a licensed master electrician, serving Scranton, Dunmore, Wilkes-Barre, Pittston, Archbald, and 25+ other NEPA communities. OSHA-trained techs work to 2020 NEC code, with residential focus on panel upgrades, EV chargers, smart panels, and solar.
Envy Electrical LLC
EV CertifiedScranton-area electrical contractor with offices in Peckville and Kingston, covering Scranton, Dunmore, Dickson City, Wilkes-Barre, Carbondale, Honesdale, and Clarks Summit. Fully licensed and insured, installs Level 1, Level 2, and DC fast EV chargers for residential clients.
Magawatt Electrical Services
Jefferson Township electrical contractor serving Scranton and Wilkes-Barre with decades of field experience across Lackawanna and Luzerne Counties. Residential service covers panel work, generators, and EV chargers, with 24/7 emergency dispatch.
Vishnefski Electrical Inc.
Nanticoke-based electrical contractor with 65+ years of combined experience, IBEW Local 1319 and NJATC affiliated, serving Scranton, Dickson City, Wilkes-Barre, Pittston, Mountain Top, Kingston, Bloomsburg, and the surrounding Luzerne, Lackawanna, and Columbia Counties.
Leber Electric Inc
Family-owned Scranton electrical contractor at 1017 W Lackawanna Ave, operating since 1955 with 60+ years of residential, commercial, and industrial work. Licensed, bonded, and fully insured, with strengths in panel upgrades, complete rewiring, and new-construction wiring.
Are you an electrician in Scranton?
Free listing, no fees. Already here? Claim it. Not yet? Add your business.
Before you hire in Scranton
A short checklist of things to verify before you sign a contract or hand over a deposit. These apply whether you find your contractor here, on Angi, or anywhere else.
- 1
Building permit on the contractor, not you
Most cities require a permit for any structural work. The contractor should pull the permit in their name so they carry the liability for code compliance. If a contractor offers to skip the permit or asks you to pull it as a homeowner, that is a warning sign. - 2
Licensed electrician (Pennsylvania)
Pennsylvania requires a state electrical license through the No state competency license; HIC registration with PA OAG if residential >$5,000/yr. Ask for the license number and verify it on the state lookup before signing.Verify on No state competency license; HIC registration with PA OAG if residential >$5,000/yr - 3
General liability + workers comp
Ask for a Certificate of Insurance (COI) with you listed as a certificate holder. In Pennsylvania: workers comp is required by state law. For general liability, most contractors carry $500K–$1M in coverage. If an uninsured worker is hurt on your property, you can be liable. - 4
Written contract with clear terms
Get it in writing. The contract should cover: scope of work, total price (not hourly unless explicitly agreed), materials and brands, start and finish dates, payment schedule tied to milestones (not calendar dates), warranty period, and procedures for change orders. Never pay more than 1/3 up front, and never pay the final payment until the work passes inspection. - 5
References and public reputation
Ask for 3 references on recent similar projects and actually call them. Cross-check reviews across Google, the Better Business Bureau, and the state licensing board's complaint history. A contractor with zero online footprint is a risk, even if they come highly recommended.
Every contractor we list is verified against public records, but verification is not a quality guarantee. Run through this checklist on any contractor you are seriously considering.
How to Choose a Electrician in Scranton
Follow these steps to find a reliable, licensed electrician in the Scranton, Pennsylvania area.
Verify the master electrician license
Any permitted electrical work must be signed off by a licensed master electrician. Look up the license on your state electrical board before hiring.
Confirm liability insurance and bonding
Electricians should carry at least $1M general liability plus workers compensation. Bonded contractors give you recourse if work fails inspection.
Require permits on every job
Panel upgrades, new circuits, EV chargers, and rewires all need a permit. A licensed electrician pulls the permit — not you. Cash deals without permits void your insurance.
Get 3+ written bids for big work
Panel upgrades and rewires should have itemized bids. Watch for "too good to be true" pricing, which often signals unlicensed labor or corner-cutting on conductors.
Ask about EV charger certification
For Level 2 installs, ask if the electrician is familiar with your panel brand and local utility requirements. Some utilities require load management gear.
Demand a written warranty
Quality electrical work comes with a 1-year workmanship warranty at minimum. Equipment manufacturer warranties (panels, chargers) run 5-25 years separately.
Electrical Costs in Scranton, PA
Typical prices for residential electrical work in Scranton. Ranges reflect full-installation pricing with permit included where applicable — not service-call minimums. Hourly rates run $70-$146 per hour for troubleshooting and small repairs.
| Service | Low | Average | High |
|---|---|---|---|
| Service call / troubleshooting | $156 | $200 | $264 |
| New outlet install | $190 | $243 | $321 |
| Ceiling fan replacement | $253 | $324 | $428 |
| 200A panel upgrade | $2,359 | $3,024 | $3,992 |
| Level 2 EV charger install | $1,390 | $1,782 | $2,352 |
| Generator transfer switch | $1,137 | $1,458 | $1,925 |
| Whole-house rewire (1,800 sq ft) | $9,266 | $11,880 | $15,682 |
Cost data derived from RSMeans regional indices, BLS construction wage data, and NECA market surveys. Actual quotes will vary based on scope, panel condition, and utility coordination. Permit fees in Scranton typically run $65-$378.
Get a Detailed Cost EstimateElectrical Permit Requirements in Scranton
Nearly all electrical work in Scranton requires a permit — panel upgrades, new circuits, outlet additions beyond simple fixture swaps, EV chargers, generator transfer switches, and whole-house rewires. Your licensed electrician pulls the permit, not you. Permit fees typically range $65-$378. Work without a permit is a code violation that can void homeowners insurance and block a future home sale.
Frequently Asked Questions
How much do electricians charge in Scranton, Pennsylvania?
Electricians in Scranton typically charge $70-$146 per hour, with a minimum service call fee around $156-$264. Job-based pricing is more common than hourly for installs: adding an outlet runs $190-$321, a ceiling fan swap runs $253-$428. Complex work like panel upgrades or whole-house rewires is quoted per project.
How much does a panel upgrade cost in Scranton?
Upgrading from a 100-amp to a 200-amp service panel in Scranton typically costs $2,359-$3,992, including the panel, meter socket, permit, and utility coordination. Older homes with aluminum or cloth-wrapped wiring, or panels requiring a meter relocation, can push the high end over $5,190. Most residential EV charger installs and solar tie-ins require a 200-amp panel.
How much does it cost to install a Level 2 EV charger in Scranton?
Level 2 EV charger installation in Scranton runs $1,390-$2,352 for a 40-amp circuit on a short cable run from the panel. Longer runs, trenching to a detached garage, panel upgrades, or load management gear push costs higher. The federal Section 30C credit (30% up to $1,000) is still available through June 30, 2026 for residential installs in qualifying census tracts — ask your electrician to confirm eligibility before the deadline.
Do I need a permit to hire an electrician in Scranton?
Yes. Nearly all electrical work in Scranton requires a permit — panel upgrades, new circuits, outlet additions, EV chargers, generator transfer switches, and whole-house rewires. Permit fees typically range $65-$378 and your licensed electrician should pull the permit (not you). Simple fixture swaps on existing circuits are the main exemption. Work without a permit is a code violation that can void your homeowners insurance and block a future home sale.
How do I verify an electrician is licensed in Pennsylvania?
Most states publish a searchable licensing roster you can use to confirm an electrician's license status, bond, and disciplinary history. In Pennsylvania, look up the state electrical board (or department of labor) online license lookup before hiring. Ask to see the license card, confirm the license number matches public records, and require proof of liability insurance and workers comp (never pay cash without these verified).
What is a master electrician vs a journeyman?
A master electrician has passed an advanced exam (typically requiring 7,000+ hours of field work plus written and practical tests) and can pull permits, sign off on work, and supervise journeymen and apprentices. A journeyman electrician has completed a 4-year apprenticeship and can do most wiring work under a master's license. For any job requiring a permit in Scranton, a master electrician must be on the license — confirm this before signing a contract.