Electricians in Reading, PA
Licensed electricians serving Reading, Pennsylvania. Panel upgrades, EV chargers, rewires, and service calls. License data and local permit requirements.
Last updated: April 2026 · Cost data from RSMeans & BLS regional indices · Permit data from official city .gov sources
Top Rated Electricians in Reading
Waldman Electrical Contractors
West Reading family-owned electrical contractor at 517 Franklin St, established 1918 with more than a century serving Reading and Berks County. Offers residential service upgrades, rewires, lightning protection, and both automatic and manual generator installation with 24/7 emergency dispatch.
Synergy Power Systems
EV CertifiedReading-based electrical and power contractor headquartered at 1007 Carsonia Ave with a satellite office in Ephrata, serving Berks, Lancaster, Bucks, and Montgomery Counties. Generac Authorized Dealer since 2018, with a residential focus on standby generators, service upgrades, and Level 2 EV chargers.
USA Electrical Services
EV CertifiedLancaster-based family-owned contractor since 2004, serving Reading, Ephrata, Lebanon, Lititz, Hershey, Harrisburg, and York. State-certified crew handling residential panel upgrades, EV chargers, and whole-house surge protection across central PA.
KP Electric Innovations
LicensedFamily-owned electrical contractor covering Reading, Birdsboro, New Holland, Coatesville, and surrounding Chester and Delaware Counties, with a team carrying 100+ years of combined experience. Drug-tested and background-checked technicians, Networx Super Service Award recipient.
Kelley Electric
Fully insured electrical contractor covering Reading, the Lehigh Valley, Poconos, and Pottsville, handling residential panel installs, 110/220V circuits, whole-house rewires, and EV chargers. Strong on hot tub, pool, and heat-trace work for Berks County homes.
Job Done Electrical Services
LicensedBoyertown-based electrical contractor covering Reading, Allentown, Lansdale, and 30+ other Berks, Montgomery, and Lehigh County municipalities. Residential focus on panel upgrades, EV chargers, generators, and outdoor/hardscape lighting, with free estimates and 24/7 emergency response.
Are you an electrician in Reading?
Free listing, no fees. Already here? Claim it. Not yet? Add your business.
Before you hire in Reading
A short checklist of things to verify before you sign a contract or hand over a deposit. These apply whether you find your contractor here, on Angi, or anywhere else.
- 1
Building permit on the contractor, not you
Most cities require a permit for any structural work. The contractor should pull the permit in their name so they carry the liability for code compliance. If a contractor offers to skip the permit or asks you to pull it as a homeowner, that is a warning sign. - 2
Licensed electrician (Pennsylvania)
Pennsylvania requires a state electrical license through the No state competency license; HIC registration with PA OAG if residential >$5,000/yr. Ask for the license number and verify it on the state lookup before signing.Verify on No state competency license; HIC registration with PA OAG if residential >$5,000/yr - 3
General liability + workers comp
Ask for a Certificate of Insurance (COI) with you listed as a certificate holder. In Pennsylvania: workers comp is required by state law. For general liability, most contractors carry $500K–$1M in coverage. If an uninsured worker is hurt on your property, you can be liable. - 4
Written contract with clear terms
Get it in writing. The contract should cover: scope of work, total price (not hourly unless explicitly agreed), materials and brands, start and finish dates, payment schedule tied to milestones (not calendar dates), warranty period, and procedures for change orders. Never pay more than 1/3 up front, and never pay the final payment until the work passes inspection. - 5
References and public reputation
Ask for 3 references on recent similar projects and actually call them. Cross-check reviews across Google, the Better Business Bureau, and the state licensing board's complaint history. A contractor with zero online footprint is a risk, even if they come highly recommended.
Every contractor we list is verified against public records, but verification is not a quality guarantee. Run through this checklist on any contractor you are seriously considering.
How to Choose a Electrician in Reading
Follow these steps to find a reliable, licensed electrician in the Reading, Pennsylvania area.
Verify the master electrician license
Any permitted electrical work must be signed off by a licensed master electrician. Look up the license on your state electrical board before hiring.
Confirm liability insurance and bonding
Electricians should carry at least $1M general liability plus workers compensation. Bonded contractors give you recourse if work fails inspection.
Require permits on every job
Panel upgrades, new circuits, EV chargers, and rewires all need a permit. A licensed electrician pulls the permit — not you. Cash deals without permits void your insurance.
Get 3+ written bids for big work
Panel upgrades and rewires should have itemized bids. Watch for "too good to be true" pricing, which often signals unlicensed labor or corner-cutting on conductors.
Ask about EV charger certification
For Level 2 installs, ask if the electrician is familiar with your panel brand and local utility requirements. Some utilities require load management gear.
Demand a written warranty
Quality electrical work comes with a 1-year workmanship warranty at minimum. Equipment manufacturer warranties (panels, chargers) run 5-25 years separately.
Electrical Costs in Reading, PA
Typical prices for residential electrical work in Reading. Ranges reflect full-installation pricing with permit included where applicable — not service-call minimums. Hourly rates run $70-$146 per hour for troubleshooting and small repairs.
| Service | Low | Average | High |
|---|---|---|---|
| Service call / troubleshooting | $156 | $200 | $264 |
| New outlet install | $190 | $243 | $321 |
| Ceiling fan replacement | $253 | $324 | $428 |
| 200A panel upgrade | $2,359 | $3,024 | $3,992 |
| Level 2 EV charger install | $1,390 | $1,782 | $2,352 |
| Generator transfer switch | $1,137 | $1,458 | $1,925 |
| Whole-house rewire (1,800 sq ft) | $9,266 | $11,880 | $15,682 |
Cost data derived from RSMeans regional indices, BLS construction wage data, and NECA market surveys. Actual quotes will vary based on scope, panel condition, and utility coordination. Permit fees in Reading typically run $65-$378.
Get a Detailed Cost EstimateElectrical Permit Requirements in Reading
Nearly all electrical work in Reading requires a permit — panel upgrades, new circuits, outlet additions beyond simple fixture swaps, EV chargers, generator transfer switches, and whole-house rewires. Your licensed electrician pulls the permit, not you. Permit fees typically range $65-$378. Work without a permit is a code violation that can void homeowners insurance and block a future home sale.
Frequently Asked Questions
How much do electricians charge in Reading, Pennsylvania?
Electricians in Reading typically charge $70-$146 per hour, with a minimum service call fee around $156-$264. Job-based pricing is more common than hourly for installs: adding an outlet runs $190-$321, a ceiling fan swap runs $253-$428. Complex work like panel upgrades or whole-house rewires is quoted per project.
How much does a panel upgrade cost in Reading?
Upgrading from a 100-amp to a 200-amp service panel in Reading typically costs $2,359-$3,992, including the panel, meter socket, permit, and utility coordination. Older homes with aluminum or cloth-wrapped wiring, or panels requiring a meter relocation, can push the high end over $5,190. Most residential EV charger installs and solar tie-ins require a 200-amp panel.
How much does it cost to install a Level 2 EV charger in Reading?
Level 2 EV charger installation in Reading runs $1,390-$2,352 for a 40-amp circuit on a short cable run from the panel. Longer runs, trenching to a detached garage, panel upgrades, or load management gear push costs higher. The federal Section 30C credit (30% up to $1,000) is still available through June 30, 2026 for residential installs in qualifying census tracts — ask your electrician to confirm eligibility before the deadline.
Do I need a permit to hire an electrician in Reading?
Yes. Nearly all electrical work in Reading requires a permit — panel upgrades, new circuits, outlet additions, EV chargers, generator transfer switches, and whole-house rewires. Permit fees typically range $65-$378 and your licensed electrician should pull the permit (not you). Simple fixture swaps on existing circuits are the main exemption. Work without a permit is a code violation that can void your homeowners insurance and block a future home sale.
How do I verify an electrician is licensed in Pennsylvania?
Most states publish a searchable licensing roster you can use to confirm an electrician's license status, bond, and disciplinary history. In Pennsylvania, look up the state electrical board (or department of labor) online license lookup before hiring. Ask to see the license card, confirm the license number matches public records, and require proof of liability insurance and workers comp (never pay cash without these verified).
What is a master electrician vs a journeyman?
A master electrician has passed an advanced exam (typically requiring 7,000+ hours of field work plus written and practical tests) and can pull permits, sign off on work, and supervise journeymen and apprentices. A journeyman electrician has completed a 4-year apprenticeship and can do most wiring work under a master's license. For any job requiring a permit in Reading, a master electrician must be on the license — confirm this before signing a contract.