Electricians in El Paso, TX
Licensed electricians serving El Paso, Texas. Panel upgrades, EV chargers, rewires, and service calls. License data and local permit requirements.
Last updated: April 2026 · Cost data from RSMeans & BLS regional indices · Permit data from official city .gov sources
Top Rated Electricians in El Paso
Tibuni's Electrical Contractors
LicensedMaster ElectricianLocally owned El Paso family electrical business run by master electrician Leonardo "Lenny" Tibuni with 16+ years licensed. Covers residential and commercial upgrades, troubleshooting, LED lighting and remodels.
Art's Electric
EV CertifiedFamily-owned El Paso electrical shop on Gateway South founded in 1994 with 36 years of field experience and licensing in both Texas and New Mexico. Operates 24/7 covering residential panel work, EV charger carport wiring and solar electrical tie-ins.
Dependable Electric
Long-running El Paso electrical contractor serving the community since 1975, with a heavy focus on residential panel installs and upgrades. Provides licensed, bonded and insured 24/7 emergency service across the El Paso area.
DAG Electric
LicensedMaster ElectricianEV CertifiedEl Paso-area electrical contractor covering Horizon and Socorro, led by master electrician Tony Garcia with 22 years of field experience. Services include panel and service meter upgrades, EV fleet connections and code-compliance fixes for residential and commercial.
Liza's Tovar Electric
EV CertifiedFamily-owned El Paso electrical contractor on Carnegie Avenue with 50+ years in business, BBB A+ accredited and HUB/WBE/NMSDC certified with bilingual staff. Focus spans residential repair, EV chargers, LED conversions and ceiling fans throughout El Paso.
VIR Electric
Master ElectricianFamily-owned El Paso electrical contractor on Soleen Road in 79938, founded in 2004 and staffed with certified master electricians. Full residential, commercial, industrial and construction scope with a one-year warranty and 24-hour emergency service.
Are you an electrician in El Paso?
Free listing, no fees. Already here? Claim it. Not yet? Add your business.
Before you hire in El Paso
A short checklist of things to verify before you sign a contract or hand over a deposit. These apply whether you find your contractor here, on Angi, or anywhere else.
- 1
Building permit on the contractor, not you
Most cities require a permit for any structural work. The contractor should pull the permit in their name so they carry the liability for code compliance. If a contractor offers to skip the permit or asks you to pull it as a homeowner, that is a warning sign. - 2
Licensed electrician (Texas)
Texas requires Master Electrician, Journeyman Electrician, Electrical Contractor (company license), Residential Wireman through the Texas Department of Licensing and Regulation (TDLR). Ask for the license number and verify it on the state lookup before signing.Verify on Texas Department of Licensing and Regulation (TDLR) - 3
General liability + workers comp
Ask for a Certificate of Insurance (COI) with you listed as a certificate holder. In Texas: Texas is one of the only states where workers' compensation is OPTIONAL for private employers (Texas Labor Code Chapter 406). For general liability, most contractors carry $500K–$1M in coverage. If an uninsured worker is hurt on your property, you can be liable. - 4
Written contract with clear terms
Get it in writing. The contract should cover: scope of work, total price (not hourly unless explicitly agreed), materials and brands, start and finish dates, payment schedule tied to milestones (not calendar dates), warranty period, and procedures for change orders. Never pay more than 1/3 up front, and never pay the final payment until the work passes inspection. - 5
References and public reputation
Ask for 3 references on recent similar projects and actually call them. Cross-check reviews across Google, the Better Business Bureau, and the state licensing board's complaint history. A contractor with zero online footprint is a risk, even if they come highly recommended.
Every contractor we list is verified against public records, but verification is not a quality guarantee. Run through this checklist on any contractor you are seriously considering.
How to Choose a Electrician in El Paso
Follow these steps to find a reliable, licensed electrician in the El Paso, Texas area.
Verify the master electrician license
Any permitted electrical work must be signed off by a licensed master electrician. Look up the license on your state electrical board before hiring.
Confirm liability insurance and bonding
Electricians should carry at least $1M general liability plus workers compensation. Bonded contractors give you recourse if work fails inspection.
Require permits on every job
Panel upgrades, new circuits, EV chargers, and rewires all need a permit. A licensed electrician pulls the permit — not you. Cash deals without permits void your insurance.
Get 3+ written bids for big work
Panel upgrades and rewires should have itemized bids. Watch for "too good to be true" pricing, which often signals unlicensed labor or corner-cutting on conductors.
Ask about EV charger certification
For Level 2 installs, ask if the electrician is familiar with your panel brand and local utility requirements. Some utilities require load management gear.
Demand a written warranty
Quality electrical work comes with a 1-year workmanship warranty at minimum. Equipment manufacturer warranties (panels, chargers) run 5-25 years separately.
Electrical Costs in El Paso, TX
Typical prices for residential electrical work in El Paso. Ranges reflect full-installation pricing with permit included where applicable — not service-call minimums. Hourly rates run $62-$128 per hour for troubleshooting and small repairs.
| Service | Low | Average | High |
|---|---|---|---|
| Service call / troubleshooting | $137 | $176 | $232 |
| New outlet install | $167 | $214 | $282 |
| Ceiling fan replacement | $222 | $285 | $376 |
| 200A panel upgrade | $2,075 | $2,660 | $3,511 |
| Level 2 EV charger install | $1,223 | $1,568 | $2,070 |
| Generator transfer switch | $1,001 | $1,283 | $1,694 |
| Whole-house rewire (1,800 sq ft) | $8,151 | $10,450 | $13,794 |
Cost data derived from RSMeans regional indices, BLS construction wage data, and NECA market surveys. Actual quotes will vary based on scope, panel condition, and utility coordination. Permit fees in El Paso typically run $57-$333.
Get a Detailed Cost EstimateElectrical Permit Requirements in El Paso
Nearly all electrical work in El Paso requires a permit — panel upgrades, new circuits, outlet additions beyond simple fixture swaps, EV chargers, generator transfer switches, and whole-house rewires. Your licensed electrician pulls the permit, not you. Permit fees typically range $57-$333. Work without a permit is a code violation that can void homeowners insurance and block a future home sale.
Frequently Asked Questions
How much do electricians charge in El Paso, Texas?
Electricians in El Paso typically charge $62-$128 per hour, with a minimum service call fee around $137-$232. Job-based pricing is more common than hourly for installs: adding an outlet runs $167-$282, a ceiling fan swap runs $222-$376. Complex work like panel upgrades or whole-house rewires is quoted per project.
How much does a panel upgrade cost in El Paso?
Upgrading from a 100-amp to a 200-amp service panel in El Paso typically costs $2,075-$3,511, including the panel, meter socket, permit, and utility coordination. Older homes with aluminum or cloth-wrapped wiring, or panels requiring a meter relocation, can push the high end over $4,564. Most residential EV charger installs and solar tie-ins require a 200-amp panel.
How much does it cost to install a Level 2 EV charger in El Paso?
Level 2 EV charger installation in El Paso runs $1,223-$2,070 for a 40-amp circuit on a short cable run from the panel. Longer runs, trenching to a detached garage, panel upgrades, or load management gear push costs higher. The federal Section 30C credit (30% up to $1,000) is still available through June 30, 2026 for residential installs in qualifying census tracts — ask your electrician to confirm eligibility before the deadline.
Do I need a permit to hire an electrician in El Paso?
Yes. Nearly all electrical work in El Paso requires a permit — panel upgrades, new circuits, outlet additions, EV chargers, generator transfer switches, and whole-house rewires. Permit fees typically range $57-$333 and your licensed electrician should pull the permit (not you). Simple fixture swaps on existing circuits are the main exemption. Work without a permit is a code violation that can void your homeowners insurance and block a future home sale.
How do I verify an electrician is licensed in Texas?
Most states publish a searchable licensing roster you can use to confirm an electrician's license status, bond, and disciplinary history. In Texas, look up the state electrical board (or department of labor) online license lookup before hiring. Ask to see the license card, confirm the license number matches public records, and require proof of liability insurance and workers comp (never pay cash without these verified).
What is a master electrician vs a journeyman?
A master electrician has passed an advanced exam (typically requiring 7,000+ hours of field work plus written and practical tests) and can pull permits, sign off on work, and supervise journeymen and apprentices. A journeyman electrician has completed a 4-year apprenticeship and can do most wiring work under a master's license. For any job requiring a permit in El Paso, a master electrician must be on the license — confirm this before signing a contract.