Electricians in Dallas, TX
Licensed electricians serving Dallas, Texas. Panel upgrades, EV chargers, rewires, and service calls. License data and local permit requirements.
Last updated: April 2026 · Cost data from RSMeans & BLS regional indices · Permit data from official city .gov sources
Local context for Dallas
Dallas permits are issued by Development Services through the DallasNow portal, which replaced the legacy POSSE system in May 2025. Dallas enforces the Dallas Building Code, based on the IBC/IRC with city amendments. Texas does not license general contractors statewide, but Dallas confirms trade licenses (electrical, plumbing, HVAC) through TDLR. Dallas inspection scheduling uses an automated IVR line at (214) 670-5313.
Permits filed through City of Dallas Development Services · official portal
Top Rated Electricians in Dallas
All In One Electric
LicensedMaster ElectricianEV CertifiedRichardson-based family shop on East Arapaho Road founded in 1986 by the Green family, now run as a father-and-son dual master electrician team (Larry and Logan Green). Tesla Wall Connector Approved and experienced across major residential EV charging platforms, covering Richardson, Dallas, Plano, Garland, Addison, Highland Park and University Park.
Bright Light Electric
LicensedMaster ElectricianEV CertifiedSmall local shop in the White Rock Lake area of Dallas run by master electrician Carlos Zepeda, in business since 2014. Panel upgrades bundle a whole-house surge protector, lighting grounding system and optional generator interlock kit, and service reaches Frisco, Plano, Richardson, McKinney, Allen and Prosper.
Hawes Electric Service
LicensedFamily-owned Dallas electrical contractor founded in 1945 and based on Burbank Street near Stemmons, with uniformed, licensed electricians covering the entire Metroplex. Four generations of electrical work with a strong focus on rewires, panel replacements and residential remodels.
Electric Pros, Inc.
LicensedFamily-owned Dallas electrical contractor on Fairmount Street in Oak Lawn with over 50 years of combined electrician experience on the team. Covers full-house rewires, panel and meter upgrades, spa hookups and code-correction work on residential and small commercial jobs.
Elevated Electrical
EV CertifiedFamily-owned Dallas-metroplex electrical company with 30+ years of experience, and an authorized Generac dealer for standby generators. Services stretch across Allen, Carrollton, Celina, Dallas, Denton, Frisco, Grapevine, Las Colinas, Lewisville, McKinney, Plano, Prosper, Richardson, Rockwall, Rowlett, Sachse and Wylie.
5th Generation Electric
Master ElectricianEV CertifiedDallas-Fort Worth electrical contractor run by a master electrician with 22+ years of experience, focused on panel upgrades, EV wall chargers and whole-home backup power. Works residential and commercial across the Metroplex with a licensed-and-insured team.
Are you an electrician in Dallas?
Free listing, no fees. Already here? Claim it. Not yet? Add your business.
Before you hire in Dallas
A short checklist of things to verify before you sign a contract or hand over a deposit. These apply whether you find your contractor here, on Angi, or anywhere else.
- 1
Building permit on the contractor, not you
Most cities require a permit for any structural work. The contractor should pull the permit in their name so they carry the liability for code compliance. If a contractor offers to skip the permit or asks you to pull it as a homeowner, that is a warning sign. - 2
Licensed electrician (Texas)
Texas requires Master Electrician, Journeyman Electrician, Electrical Contractor (company license), Residential Wireman through the Texas Department of Licensing and Regulation (TDLR). Ask for the license number and verify it on the state lookup before signing.Verify on Texas Department of Licensing and Regulation (TDLR) - 3
General liability + workers comp
Ask for a Certificate of Insurance (COI) with you listed as a certificate holder. In Texas: Texas is one of the only states where workers' compensation is OPTIONAL for private employers (Texas Labor Code Chapter 406). For general liability, most contractors carry $500K–$1M in coverage. If an uninsured worker is hurt on your property, you can be liable. - 4
Written contract with clear terms
Get it in writing. The contract should cover: scope of work, total price (not hourly unless explicitly agreed), materials and brands, start and finish dates, payment schedule tied to milestones (not calendar dates), warranty period, and procedures for change orders. Never pay more than 1/3 up front, and never pay the final payment until the work passes inspection. - 5
References and public reputation
Ask for 3 references on recent similar projects and actually call them. Cross-check reviews across Google, the Better Business Bureau, and the state licensing board's complaint history. A contractor with zero online footprint is a risk, even if they come highly recommended.
Every contractor we list is verified against public records, but verification is not a quality guarantee. Run through this checklist on any contractor you are seriously considering.
How to Choose a Electrician in Dallas
Follow these steps to find a reliable, licensed electrician in the Dallas, Texas area.
Verify the master electrician license
Any permitted electrical work must be signed off by a licensed master electrician. Look up the license on your state electrical board before hiring.
Confirm liability insurance and bonding
Electricians should carry at least $1M general liability plus workers compensation. Bonded contractors give you recourse if work fails inspection.
Require permits on every job
Panel upgrades, new circuits, EV chargers, and rewires all need a permit. A licensed electrician pulls the permit — not you. Cash deals without permits void your insurance.
Get 3+ written bids for big work
Panel upgrades and rewires should have itemized bids. Watch for "too good to be true" pricing, which often signals unlicensed labor or corner-cutting on conductors.
Ask about EV charger certification
For Level 2 installs, ask if the electrician is familiar with your panel brand and local utility requirements. Some utilities require load management gear.
Demand a written warranty
Quality electrical work comes with a 1-year workmanship warranty at minimum. Equipment manufacturer warranties (panels, chargers) run 5-25 years separately.
Working with electricians in Dallas
- Expansive clay soils across North Texas make foundation movement a common issue, and Dallas reviewers expect appropriate foundation design on additions
- Dallas has locally designated historic districts (Swiss Avenue, Munger Place, Wilson) where Landmark Commission review applies
- Storm-season hail drives roof replacement volume, and Class 4 impact-rated shingles are commonly specified for insurance discounts
Electrical Costs in Dallas, TX
Typical prices for residential electrical work in Dallas. Ranges reflect full-installation pricing with permit included where applicable — not service-call minimums. Hourly rates run $62-$128 per hour for troubleshooting and small repairs.
| Service | Low | Average | High |
|---|---|---|---|
| Service call / troubleshooting | $137 | $176 | $232 |
| New outlet install | $167 | $214 | $282 |
| Ceiling fan replacement | $222 | $285 | $376 |
| 200A panel upgrade | $2,075 | $2,660 | $3,511 |
| Level 2 EV charger install | $1,223 | $1,568 | $2,070 |
| Generator transfer switch | $1,001 | $1,283 | $1,694 |
| Whole-house rewire (1,800 sq ft) | $8,151 | $10,450 | $13,794 |
Cost data derived from RSMeans regional indices, BLS construction wage data, and NECA market surveys. Actual quotes will vary based on scope, panel condition, and utility coordination. Permit fees in Dallas typically run $57-$333.
Get a Detailed Cost EstimateElectrical Permit Requirements in Dallas
Nearly all electrical work in Dallas requires a permit — panel upgrades, new circuits, outlet additions beyond simple fixture swaps, EV chargers, generator transfer switches, and whole-house rewires. Your licensed electrician pulls the permit, not you. Permit fees typically range $57-$333. Work without a permit is a code violation that can void homeowners insurance and block a future home sale.
Frequently Asked Questions
How much do electricians charge in Dallas, Texas?
Electricians in Dallas typically charge $62-$128 per hour, with a minimum service call fee around $137-$232. Job-based pricing is more common than hourly for installs: adding an outlet runs $167-$282, a ceiling fan swap runs $222-$376. Complex work like panel upgrades or whole-house rewires is quoted per project.
How much does a panel upgrade cost in Dallas?
Upgrading from a 100-amp to a 200-amp service panel in Dallas typically costs $2,075-$3,511, including the panel, meter socket, permit, and utility coordination. Older homes with aluminum or cloth-wrapped wiring, or panels requiring a meter relocation, can push the high end over $4,564. Most residential EV charger installs and solar tie-ins require a 200-amp panel.
How much does it cost to install a Level 2 EV charger in Dallas?
Level 2 EV charger installation in Dallas runs $1,223-$2,070 for a 40-amp circuit on a short cable run from the panel. Longer runs, trenching to a detached garage, panel upgrades, or load management gear push costs higher. The federal Section 30C credit (30% up to $1,000) is still available through June 30, 2026 for residential installs in qualifying census tracts — ask your electrician to confirm eligibility before the deadline.
Do I need a permit to hire an electrician in Dallas?
Yes. Nearly all electrical work in Dallas requires a permit — panel upgrades, new circuits, outlet additions, EV chargers, generator transfer switches, and whole-house rewires. Permit fees typically range $57-$333 and your licensed electrician should pull the permit (not you). Simple fixture swaps on existing circuits are the main exemption. Work without a permit is a code violation that can void your homeowners insurance and block a future home sale.
How do I verify an electrician is licensed in Texas?
Most states publish a searchable licensing roster you can use to confirm an electrician's license status, bond, and disciplinary history. In Texas, look up the state electrical board (or department of labor) online license lookup before hiring. Ask to see the license card, confirm the license number matches public records, and require proof of liability insurance and workers comp (never pay cash without these verified).
What is a master electrician vs a journeyman?
A master electrician has passed an advanced exam (typically requiring 7,000+ hours of field work plus written and practical tests) and can pull permits, sign off on work, and supervise journeymen and apprentices. A journeyman electrician has completed a 4-year apprenticeship and can do most wiring work under a master's license. For any job requiring a permit in Dallas, a master electrician must be on the license — confirm this before signing a contract.
Is DallasNow different from the old Dallas permit system?
Yes. DallasNow went live May 5, 2025, replacing POSSE as the city permit and plan review platform. All new applications go through DallasNow. Inspections can still be scheduled through the portal or the automated IVR line at (214) 670-5313.
Why do Dallas foundations move so much?
North Texas sits on expansive clay soils that shrink and swell with moisture. Proper foundation design, drainage, and root barriers reduce the risk, but Dallas Development Services expects proper engineering on additions and slab repairs.