Electricians in Buffalo, NY
Licensed electricians serving Buffalo, New York. Panel upgrades, EV chargers, rewires, and service calls. License data and local permit requirements.
Last updated: April 2026 · Cost data from RSMeans & BLS regional indices · Permit data from official city .gov sources
Top Rated Electricians in Buffalo
Scherer Electric
EV CertifiedVeteran-owned Buffalo-area electrical contractor serving the metropolitan area since 1995, covering Amherst, Cheektowaga, Clarence, East Aurora, Hamburg, Lancaster and Orchard Park. Offers a service-panel lifetime warranty and a 20-year warranty on exterior services.
MJM Electric Construction Inc
EV CertifiedBuffalo electrical contractor based at 453 Richmond Avenue and operating since 1994, covering Buffalo, Cheektowaga, Tonawanda, Amherst and West Seneca. Handles residential and commercial work with a focus on panel upgrades, generators and EV charger installs.
Torchia Electric
EV CertifiedBuffalo and Orchard Park electrical contractor covering Amherst, Cheektowaga, Tonawanda and Lockport with licensed, code-compliant residential and commercial electrical work. Services include panel upgrades, EV charger installation and smart home integration.
PPR Energy Solutions
Master ElectricianEV CertifiedBuffalo-headquartered contractor with 40-plus years of renewable energy experience and 35 years of master electrical contracting, holding 19 Master Electrician licenses across New York State. Tesla Wall Connector approved, EVITP certified and NABCEP certified, with service reaching Syracuse, Rochester, Ithaca and Jamestown.
Marranca Electric
Privately owned family electrical contractor based in Depew serving Western New York since 1955, covering Erie and Niagara Counties. Handles new home wiring, remodels, standby generators and whole-house surge protection for Buffalo-area homeowners.
Dugas Electric Inc
Master ElectricianElma-based licensed master electrical contractor serving Western New York since 1984 with residential and commercial service up to 480V 3-phase. BBB-accredited family business focused on service upgrades, generator interlocks and safety inspections for Buffalo-area homes.
Driscoll Electric Construction Inc
Buffalo electrical contractor at 32 Cypress Street in business since the late 1970s with 24/7 availability. Covers residential, commercial and industrial work including rewires, panel repairs and home generator installation for Western New York.
Are you an electrician in Buffalo?
Free listing, no fees. Already here? Claim it. Not yet? Add your business.
Before you hire in Buffalo
A short checklist of things to verify before you sign a contract or hand over a deposit. These apply whether you find your contractor here, on Angi, or anywhere else.
- 1
Building permit on the contractor, not you
Most cities require a permit for any structural work. The contractor should pull the permit in their name so they carry the liability for code compliance. If a contractor offers to skip the permit or asks you to pull it as a homeowner, that is a warning sign. - 2
Licensed electrician (New York)
New York requires a state electrical license through the Local (NYC Dept. of Buildings, Suffolk/Nassau/Westchester consumer affairs, etc.). Ask for the license number and verify it on the state lookup before signing.Verify on Local (NYC Dept. of Buildings, Suffolk/Nassau/Westchester consumer affairs, etc.) - 3
General liability + workers comp
Ask for a Certificate of Insurance (COI) with you listed as a certificate holder. In New York: workers comp is required by state law. For general liability, most contractors carry $500K–$1M in coverage. If an uninsured worker is hurt on your property, you can be liable. - 4
Written contract with clear terms
Get it in writing. The contract should cover: scope of work, total price (not hourly unless explicitly agreed), materials and brands, start and finish dates, payment schedule tied to milestones (not calendar dates), warranty period, and procedures for change orders. Never pay more than 1/3 up front, and never pay the final payment until the work passes inspection. - 5
References and public reputation
Ask for 3 references on recent similar projects and actually call them. Cross-check reviews across Google, the Better Business Bureau, and the state licensing board's complaint history. A contractor with zero online footprint is a risk, even if they come highly recommended.
Every contractor we list is verified against public records, but verification is not a quality guarantee. Run through this checklist on any contractor you are seriously considering.
How to Choose a Electrician in Buffalo
Follow these steps to find a reliable, licensed electrician in the Buffalo, New York area.
Verify the master electrician license
Any permitted electrical work must be signed off by a licensed master electrician. Look up the license on your state electrical board before hiring.
Confirm liability insurance and bonding
Electricians should carry at least $1M general liability plus workers compensation. Bonded contractors give you recourse if work fails inspection.
Require permits on every job
Panel upgrades, new circuits, EV chargers, and rewires all need a permit. A licensed electrician pulls the permit — not you. Cash deals without permits void your insurance.
Get 3+ written bids for big work
Panel upgrades and rewires should have itemized bids. Watch for "too good to be true" pricing, which often signals unlicensed labor or corner-cutting on conductors.
Ask about EV charger certification
For Level 2 installs, ask if the electrician is familiar with your panel brand and local utility requirements. Some utilities require load management gear.
Demand a written warranty
Quality electrical work comes with a 1-year workmanship warranty at minimum. Equipment manufacturer warranties (panels, chargers) run 5-25 years separately.
Electrical Costs in Buffalo, NY
Typical prices for residential electrical work in Buffalo. Ranges reflect full-installation pricing with permit included where applicable — not service-call minimums. Hourly rates run $88-$182 per hour for troubleshooting and small repairs.
| Service | Low | Average | High |
|---|---|---|---|
| Service call / troubleshooting | $195 | $250 | $330 |
| New outlet install | $237 | $304 | $401 |
| Ceiling fan replacement | $316 | $405 | $535 |
| 200A panel upgrade | $2,948 | $3,780 | $4,990 |
| Level 2 EV charger install | $1,738 | $2,228 | $2,941 |
| Generator transfer switch | $1,422 | $1,823 | $2,406 |
| Whole-house rewire (1,800 sq ft) | $11,583 | $14,850 | $19,602 |
Cost data derived from RSMeans regional indices, BLS construction wage data, and NECA market surveys. Actual quotes will vary based on scope, panel condition, and utility coordination. Permit fees in Buffalo typically run $81-$473.
Get a Detailed Cost EstimateElectrical Permit Requirements in Buffalo
Nearly all electrical work in Buffalo requires a permit — panel upgrades, new circuits, outlet additions beyond simple fixture swaps, EV chargers, generator transfer switches, and whole-house rewires. Your licensed electrician pulls the permit, not you. Permit fees typically range $81-$473. Work without a permit is a code violation that can void homeowners insurance and block a future home sale.
Frequently Asked Questions
How much do electricians charge in Buffalo, New York?
Electricians in Buffalo typically charge $88-$182 per hour, with a minimum service call fee around $195-$330. Job-based pricing is more common than hourly for installs: adding an outlet runs $237-$401, a ceiling fan swap runs $316-$535. Complex work like panel upgrades or whole-house rewires is quoted per project.
How much does a panel upgrade cost in Buffalo?
Upgrading from a 100-amp to a 200-amp service panel in Buffalo typically costs $2,948-$4,990, including the panel, meter socket, permit, and utility coordination. Older homes with aluminum or cloth-wrapped wiring, or panels requiring a meter relocation, can push the high end over $6,487. Most residential EV charger installs and solar tie-ins require a 200-amp panel.
How much does it cost to install a Level 2 EV charger in Buffalo?
Level 2 EV charger installation in Buffalo runs $1,738-$2,941 for a 40-amp circuit on a short cable run from the panel. Longer runs, trenching to a detached garage, panel upgrades, or load management gear push costs higher. The federal Section 30C credit (30% up to $1,000) is still available through June 30, 2026 for residential installs in qualifying census tracts — ask your electrician to confirm eligibility before the deadline.
Do I need a permit to hire an electrician in Buffalo?
Yes. Nearly all electrical work in Buffalo requires a permit — panel upgrades, new circuits, outlet additions, EV chargers, generator transfer switches, and whole-house rewires. Permit fees typically range $81-$473 and your licensed electrician should pull the permit (not you). Simple fixture swaps on existing circuits are the main exemption. Work without a permit is a code violation that can void your homeowners insurance and block a future home sale.
How do I verify an electrician is licensed in New York?
Most states publish a searchable licensing roster you can use to confirm an electrician's license status, bond, and disciplinary history. In New York, look up the state electrical board (or department of labor) online license lookup before hiring. Ask to see the license card, confirm the license number matches public records, and require proof of liability insurance and workers comp (never pay cash without these verified).
What is a master electrician vs a journeyman?
A master electrician has passed an advanced exam (typically requiring 7,000+ hours of field work plus written and practical tests) and can pull permits, sign off on work, and supervise journeymen and apprentices. A journeyman electrician has completed a 4-year apprenticeship and can do most wiring work under a master's license. For any job requiring a permit in Buffalo, a master electrician must be on the license — confirm this before signing a contract.