Average Vinyl/LVP Flooring Cost in North Dakota
$1,989
Low End
$1,384
Average
$1,989
High End
$2,650
Want a more precise estimate?
Use our free Flooring calculatorHere's how vinyl/lvp flooring costs typically break down in North Dakota:
Vinyl/LVP Flooring in North Dakota is 20% below the national average of $2,487. This makes North Dakota one of the more affordable states for vinyl/lvp flooring.
North Dakota experiences one of the coldest climates in the continental United States, with long, harsh winters, short, warm summers, and some of the widest daily temperature swings anywhere in the country. Frost lines reach past 60 inches, exterior work concentrates into roughly May through September, and wind-driven snow is a significant design factor across the plains. For vinyl/lvp flooring projects specifically, this means timing and material selection are key factors in both cost and quality.
A larger pool of available contractors and moderate demand create competitive pricing in this market.
North Dakota requires a state contractor license through the Secretary of State for any job over $4,000, verify status at sos.nd.gov before contracting
Xcel Energy, MDU, and rural cooperatives run active 2026 rebates for heat pumps, weatherization, and smart thermostats, separate from federal credit changes
Frost lines past 60 inches drive the deepest foundations in the country, schedule all concrete and below-grade work between late May and early October
Wind-driven snow is a significant design factor, ask about snow-catch detailing, drift loads on low roofs, and ice-dam prevention on every exterior scope
Most vinyl/lvp flooring projects in North Dakota require a building permit, especially if structural changes are involved. Estimated permit cost: $0.
View full permit guide for North DakotaShare your project once and we'll send it to up to 3 verified vinyl-flooring pros in your area. Free for you, free for them. Never shared with more than 3, and never with anyone we have not verified.
Vinyl/LVP Flooring in North Dakota typically costs between $1,384 and $2,650, with an average of $1,989 for a typical project in 2026.
No, vinyl/lvp flooring in North Dakota is about 20% below the national average, making it more affordable than many other states.
Permit requirements vary by city and county in North Dakota. Most vinyl/lvp flooring projects that involve structural changes require a building permit. Check our permit guide for North Dakota for specific requirements.
A typical vinyl/lvp flooring project takes 2-7 days depending on the scope, weather conditions, and contractor availability in your area.
Get at least 3 quotes from licensed contractors, consider scheduling during off-peak seasons (fall/winter), ask about financing options, and make sure to compare material options as they significantly affect the total cost.
Cost estimates are based on publicly available data and industry averages for North Dakota. Actual costs vary significantly based on project specifics, contractor pricing, material choices, and local market conditions. These estimates are for informational purposes only. Always get multiple quotes from licensed contractors.