Average Concrete Driveway Cost in New Mexico
$5,822
Low End
$4,024
Average
$5,822
High End
$7,630
Want a more precise estimate?
Use our free Concrete calculatorHere's how concrete driveway costs typically break down in New Mexico:
Concrete Driveway in New Mexico is 10% below the national average of $6,446. This makes New Mexico one of the more affordable states for concrete driveway.
New Mexico experiences an arid to semi-arid climate with hot, dry summers in the south and cold, snowy winters in the northern high country around Santa Fe and Taos. Monsoon rains from July through September concentrate most water-intrusion risk into a short window, and high UV and temperature swings drive material selection for roofing, sealants, and exterior finishes. For concrete driveway projects specifically, this means timing and material selection are key factors in both cost and quality.
Lower labor costs and a favorable cost of living keep home improvement pricing competitive in this state.
New Mexico requires a Construction Industries Division (CID) license through the Regulation and Licensing Department for most residential work, verify GB-98 or GB-2 classification
PNM and El Paso Electric run active 2026 rebates for heat pumps, weatherization, and smart thermostats, the state's Sustainable Building Tax Credit also remains available
Plan exterior and stucco work around the July-September monsoon, and specify UV-stable sealants and finishes that handle the state's intense solar radiation
Santa Fe historic district design review is among the strictest in the country, factor additional permit time for any exterior change in the H-zone
Most concrete driveway projects in New Mexico require a building permit, especially if structural changes are involved. Estimated permit cost: $173.
View full permit guide for New MexicoShare your project once and we'll send it to up to 3 verified concrete-driveway pros in your area. Free for you, free for them. Never shared with more than 3, and never with anyone we have not verified.
Concrete Driveway in New Mexico typically costs between $4,024 and $7,630, with an average of $5,822 for a typical project in 2026.
No, concrete driveway in New Mexico is about 10% below the national average, making it more affordable than many other states.
Permit requirements vary by city and county in New Mexico. Most concrete driveway projects that involve structural changes require a building permit. Check our permit guide for New Mexico for specific requirements.
A typical concrete driveway project takes 2-7 days depending on the scope, weather conditions, and contractor availability in your area.
Get at least 3 quotes from licensed contractors, consider scheduling during off-peak seasons (fall/winter), ask about financing options, and make sure to compare material options as they significantly affect the total cost.
Cost estimates are based on publicly available data and industry averages for New Mexico. Actual costs vary significantly based on project specifics, contractor pricing, material choices, and local market conditions. These estimates are for informational purposes only. Always get multiple quotes from licensed contractors.