Average Concrete Driveway Cost in New Hampshire
$7,049
Low End
$4,522
Average
$7,049
High End
$9,522
Want a more precise estimate?
Use our free Concrete calculatorHere's how concrete driveway costs typically break down in New Hampshire:
Concrete Driveway in New Hampshire is 9% above the national average of $6,446. This is primarily due to higher labor costs and stronger demand in New Hampshire.
New Hampshire experiences a cold humid continental climate with long, snowy winters and short, mild summers. Frost lines of 48 inches or more and deep snow loads compress most exterior construction into a May-through-October window, and the White Mountain region faces some of the highest design snow loads in the country. For concrete driveway projects specifically, this means timing and material selection are key factors in both cost and quality.
New Hampshire's costs are close to the national average, reflecting a balanced supply-demand dynamic in the local construction market.
New Hampshire has no statewide general contractor license, so verify references, pulled permits, COIs, and workers' comp with each bidder
NHSaves (run by the major utilities) offers active 2026 rebates for heat pumps, insulation, and air sealing, separate from the expired federal energy credits
Mountain counties face some of the highest design snow loads in the country, confirm structural design matches the local ground snow load before framing
Short exterior season plus rising second-home demand means contractors book out 6-12 months ahead, lock schedules early for spring and summer slots
Most concrete driveway projects in New Hampshire require a building permit, especially if structural changes are involved. Estimated permit cost: $230.
View full permit guide for New HampshireShare your project once and we'll send it to up to 3 verified concrete-driveway pros in your area. Free for you, free for them. Never shared with more than 3, and never with anyone we have not verified.
Concrete Driveway in New Hampshire typically costs between $4,522 and $9,522, with an average of $7,049 for a typical project in 2026.
Yes, concrete driveway in New Hampshire is about 9% above the national average due to local labor costs and market conditions.
Permit requirements vary by city and county in New Hampshire. Most concrete driveway projects that involve structural changes require a building permit. Check our permit guide for New Hampshire for specific requirements.
A typical concrete driveway project takes 2-7 days depending on the scope, weather conditions, and contractor availability in your area.
Get at least 3 quotes from licensed contractors, consider scheduling during off-peak seasons (fall/winter), ask about financing options, and make sure to compare material options as they significantly affect the total cost.
Cost estimates are based on publicly available data and industry averages for New Hampshire. Actual costs vary significantly based on project specifics, contractor pricing, material choices, and local market conditions. These estimates are for informational purposes only. Always get multiple quotes from licensed contractors.