Get a Los Angeles-adjusted cost estimate for your fencing project. Our calculator starts from national averages and applies a local cost index for Los Angeles, California based on labor market data and cost-of-living indices.
Local context for Los Angeles
Los Angeles permits are issued by the Department of Building and Safety (LADBS) through the Angeleno Account via ePlanLA for plan-check projects and PermitLA for express permits. LADBS runs one of the highest permit volumes in the country. California Title 24 energy standards (2025 edition, effective January 1, 2026), strict seismic design in Category D, and the Fire Hazard Severity Zone map all shape residential construction in the city.
Permits filed through Los Angeles Department of Building and Safety (LADBS) · official portal
These figures are estimates derived from national cost data and a local cost-of-living multiplier. They are not quotes. For a firm price, use the calculator below and then get 3+ written bids from licensed local contractors.
Tip: Average backyard fence is 150-200 linear feet
Several local factors push Los Angeles fencing pricing above or below the national baseline:
What projects qualify for PermitLA express permits?
Simple work that does not need plan review, including many reroofs, water heater changeouts, and HVAC replacements on one- and two-family properties. Anything structural or that expands floor area goes through ePlanLA.
Does my Los Angeles home qualify for the soft-story retrofit program?
The mandatory program covers wood-frame buildings with four or more dwelling units and a soft, weak, or open-front first story, built under a permit before January 1, 1978. If your home is a single-family or duplex, it is not covered.
Los Angeles Department of Building and Safety (LADBS) handles fencing permits in Los Angeles. Fees, inspection schedules, and code amendments vary by project scope.
Visit the official Los Angeles permit portal ↗For 150 linear feet installed in Los Angeles, most homeowners pay between $2,600 and $10,400 in 2026. In most cities, fences 6 feet or under in the backyard do not require a permit. Fences over 6 feet, front yard fences, and fences in historic districts usually do. Check our fence permit guide for your area.
Permit requirements in Los Angeles follow California state building code plus local amendments. Vinyl: 20-30 years. Cedar: 15-20 years. Pressure-treated wood: 15-20 years. Chain link: 15-25 years. Wrought iron: 50+ years. Wood fences last longest when stained and sealed every 2-3 years. See our California permit guide for specifics.
It is not legally required in most places, but it is strongly recommended. Your neighbor may agree to split the cost of a shared boundary fence. Also check your property lines — building even a few inches on their property creates legal problems.
Chain link is cheapest at $15-$20 per linear foot installed. Wood picket fencing runs $18-$25 per linear foot. Vinyl and composite start at $30+ per linear foot but require virtually zero maintenance.
Not always required, but highly recommended. A property survey ($300-$800) confirms your exact property lines and prevents disputes. If you build on your neighbor property, they can legally require you to remove it at your expense.
Simple work that does not need plan review, including many reroofs, water heater changeouts, and HVAC replacements on one- and two-family properties. Anything structural or that expands floor area goes through ePlanLA.
The mandatory program covers wood-frame buildings with four or more dwelling units and a soft, weak, or open-front first story, built under a permit before January 1, 1978. If your home is a single-family or duplex, it is not covered.